Noble Model-200

Two Channel Pro Audiophile Amplifier

Output power in watts: FTC: 20 Hz-20 kHz @

0.1% THD, both channels driven

8Ω per channel

185 watts

4Ω per channel

280 watts

Output power in watts: EIA: 1kHz @ 0.1% THD,

both channels driven

8Ω per channel

200 watts

4Ω per channel

300 watts

1 kHz @ 1% THD, typical both channels driven

2Ω per channel

430 watts

Output power in watts: Bridge Mono

8Ω, 20 Hz-20 kHz, 0.1% THD

530 watts

8Ω, 1kHz, 0.1% THD

600 watts

4Ω, 1 kHz, 1% THD, typical

830 watts

Dynamic headroom

2 dB @ 4 Ω

Distortion

SMPTE-IM

<0.01%

Frequency response

At 10 dB below rated output power

20 Hz-20 kHz, +0/-1 dB

–3 dB points: 5Hz and 50 kHz

Damping factor

> 300 @ 8Ω

Noise

Unweighted 20 Hz to 20 kHz, below rated output 100 dB

Voltage gain

31.6x (30 dB)

Input sensitivity, V RMS

Full rated power @ 8Ω

1.15v (+3.4 dBu)

Input Impedance

10 KΩ unbalanced

20 KΩ balanced

Controls

Front: AC switch

Rear: 10 position DIP switch

Indicators

Power: Green LED

Connectors

Input: Active balanced; XLR , Gold/Teflon RCA Jacks, and barrier strip "Touch-Proof" binding posts and Neutrik Speakon TM

Cooling

Continuously variable speed fan, front-to-back air flow

Amplifier protection

Full short circuit, open circuit, thermal, ultrasonic, and RF protection

Stable into reactive or mismatched loads

Load protection

Turn-on/turn-off muting. AC coupling, triac crowbar (on each channel)

Output circuit type

AB

Dimensions

19.5" (49.5 cm) wide, 3.75" (8.9 cm) tall, [rack version is 19.0" (48.3) wide]. 15.9" (30 cm) deep (rack mounting to rear support ears)

Weight

Shipping: 43 lb. (18.6 kg)

Net: 37 lb. (15.9 kg)

Power requirements

Available for 120 or 220-240 VAC, 50/60 Hz

Power consumption @ 120 VAC both channel driven

(230VAC -Multiply currents by 0.5)

Typical

Idle 0.5A

8Ω 3A

4Ω 4.5A

2Ω 6.5A

Full

 

8Ω 4.1A

4Ω 6.6A

2Ω 9.5A

Max

 

8Ω 7.4A

4Ω 11.5A

2Ω 17A